| Kanthu | Kutha kwanthawi zonse | Kuchepetsa mphamvu | Kanthu | Kutha kwanthawi zonse | Kuchepetsa mphamvu |
| Layer No. | 2-16 | ≤20 | Max.makulidwe a mkuwa (Inner layer) | 4 OZ | 5 oz |
| Kore board makulidwe | 0.075-2.0mm | 0.05-3.0mm | Max.makulidwe a mkuwa ( Outer layer) | 4 OZ | 6 oz |
| min.PTH mpaka mkuwa | 165.1um | 152.4um | Min.danga pakati pa SMD pads kwa S/M mlatho | 203.2um | 177.8m |
| Makulidwe a board (mbali ziwiri) | 0.3-3.2 mm | 0.3-4 mm | Kusachepera kwa nthano m'lifupi/utali | 127um/762um | 101.6um / 609.6um |
| Board makulidwe(Multi-layer) | 0.6-3.2 mm | 0.6-4 mm | Onetsani kulolerana kwa dimension | ± 101.6um | ± 76.2um |
| Kulekerera kwa bolodi makulidwe (T≤0.8mm) | 0.1 mm | 0.075 mm | Kuwerama & kupindika (T≤1mm) | ≤0.75% | ≤0.5% |
| Kulekerera kwa bolodi makulidwe(T) 0.8mm | ±10% | ± 5% | Kuwerama & kupindika (T≤1mm) | ≤0.5% | ≤0.3% |
| Min.kutalika kwa mzere | 76.2m ku | 63.5m ku | Kulondola kwa dzenje mpaka dzenje | ± 0.05mm | / |
| Malo ochepa a mzere | 68.58um | 63.5m ku | Impedans control range | ±10% | ± 8% |
| Osachepera dzenje awiri | 0.2 mm | 0.15 mm | Chiyerekezo (0.2mm) | 10:1 | 12:1 |
| Kulekerera atolankhani zoyenera dzenje awiri | 0.05 mm | 0.05 mm | Anamaliza mankhwala kukula | 55-600 mm | 10-620 mm |
| njira yofotokozera | CNC, V-CUT, kukhomerera kapena nkhungu |
| Chithandizo chapamwamba | EING, OSP, Siliva womiza, Selective OSP+ENIG |
| Mtundu wa laminate | FR-4.0, FR-4.1(Normal TG, pakati TG, high TG), CEM-3, |
